Introducing Geothermal System –

A geothermal system collects energy from the earth through a series of interconnected piping and a heat transfer fluid flowing through the pipes. This implies, the more piping and the greater the diameter, the more connection with soil and the more energy the geothermal system is capable of transferring the energy. However, the amount of piping needed for a geothermal kit is fully dependent on the size of the heat pump you need as well as the soil conditions of the soil. Hence, your DIY geothermal installation kits will have the proper sizing calculated only for you depending upon your needs and location.

Geothermal systems take full advantage of the sun likewise any other solar systems. But they do this job indirectly by harvesting the solar energy that has been absorbed by the earth throughout the year. Even in the cold climates, only the top of the earth’s surface freezes. Below the upper surface, there is availability of plentiful heat energy; which will be pulled out through geothermal systems and transferred into homes and businesses.

In fact, there are four common varieties of geothermal systems available these days. If you are choosing one, remember that it’s fully dependent upon the local topography and the availability of land of water space. However, the most common and simplest one to install is the horizontal ground loop or the well loop. Keep in mind that, water loops are most popular ones but only if you have access to a lake. Here are top four types of geothermal systems available for businesses and homes:

4 Common Geothermal Heat Pumps –

Horizontal Loop –

Where the space is adequate enough, the sealed piping loop of Horizontal systems can be buried in trenches up to 3 to 6 feet deep.

Vertical Loop –

Where the space is of limited amount, the sealed piping loop can be used in small holes ranging from 150 to 400 feet deep that are installed using a well drilling rig.

Pond Loop –

When a water body is available nearby, the Pond Loop geothermal heat pump’s sealed piping loop can be submerged under the surface.

Well water –

Well Water geothermal systems are used where groundwater is of sufficient amount and of better quality so that the well water can be utilized directly instead of the sealed piping loop.

Conclusion –

Are you looking for a supplier providing geothermal systems? 123 Zero Energy specializes in offeribf quality solar and geothermal kits in order to build a Zero Energy Home. Our solar thermal and geothermal packaged systems and kits are utilized for homeowners, builders and contractors for building a Zero Energy Home. If you are seeking for a complete home energy solution, consider buying geothermal systems on 123 Zero Energy and get greater efficiency, durability of solar powered systems for more years to come! For more queries on geothermal packages, browse through our website today or feel free to contact online!